MFactory Metal Plate Limited Slip Differential. Gain a prominent advantage over the competition with this LSD. Through smooth and consistent distribution of power to the wheels the LSD puts power-to-the-ground and maximises your vehicles traction where conventional Torsen LSD's fail. Available in 1.0 way (acceleration only), 1.5 way (acceleration/deceleration) and 2.0 way (acceleration/deceleration). All MFactory metal plate LSD's are set at 60% lock for street/track usage.
Made from imported Japanese steel these diffs are 'forged' and 'cryo-tempered' for unsurpassed toughness. They are designed to withstand the extreme shock loads of competition-level drag racing. Advanced gear geometry designed using industry-leading software puts more power to the ground and the highest quality Brighton-Best hardware is used. Coil spring preload system ensures minimal powerloss and maximum response. Lower initial pressure ensures maximum durability and chatter-free operation. Fully re-buildable with adjustable lock (60-100%) and option of different cam type.
When installing your MFactory Helical LSD it is recommended to install new diff bearings.
E8X/E9X/E60 non 35-i -THE LSD IS A DIRECT BOLT ON REPLACEMENT
E8X/E9X/E60 35i AT -THE LSD IS A DIRECT BOLT ON REPLACEMENT
E8X/E9X/E60 35i MT < 03/2007 (inc. 335d) -THE LSD IS A DIRECT BOLT ON REPLACEMENT
E8X/E9X/E60 35i MT > 03/2007 (inc. 335d) -THE LSD REQUIRES EITHER THE OE CROWN WHEEL TO BE WELDED TO IT OR A NEW MFACTORY FINAL DRIVE FITTED (MF-TRS-02E25, MF-TRS-02E28, MF-TRS-02E31)
E8X/E9X/E60 35i DCT -THE LSD REQUIRES EITHER THE OE CROWN WHEEL TO BE WELDED TO IT OR A NEW MFACTORY FINAL DRIVE FITTED (MF-TRS-02E25, MF-TRS-02E28, MF-TRS-02E31)
F20/F30 All Fitments -THE LSD REQUIRES EITHER THE OE CROWN WHEEL TO BE WELDED TO IT OR A NEW MFACTORY FINAL DRIVE FITTED (MF-TRS-02E25, MF-TRS-02E28, MF-TRS-02E31)
Manufacturer | MFactory |
---|---|
Fitment | See Title |
Colour | No |
Note | No |