K-Tuned TSX/Accord Base Plate - Works with OEM Shifter

Applications: 
K-Tuned TSX/Accord Shifter KTD-TSX-ACC 
TSX/Accord OEM Shifter. 

Note:
* Can be used on a K-Swapped car with the newer 06-11 Civic Si transmission (K20Z3 transmission) or the K24 TSX or Accord Transimission

The K-Tuned Billet Shifter Base Plate is designed to install KTD-TSX-ACC (K-Tuned TSX/Accord Shifter) or OEM Accord/TSX Shifter in EF/EG/EK/DC2. This setup is preferred by many racers, esp. road course racers, because it mounts the shifter higher in the vehicle, keeping it closer to the driver and the steering. It also leaves a lot more room below the car for large exhaust systems. 

The Shifter Base Plate was designed to route your shifter cables inside the car. Generally users set them up to exit through the heater hose hole in the firewall. Note that we are assuming the heater core has been deleted on most race cars. We also want users to be aware that this shifter setup does not clear any interior panels or center consoles on any chassis.