Hybrid Racing K-Swap A/C Line Kit Honda Integra 94-01

The Hybrid Racing K-Swap air conditioning conversion kit allows you to retain AC when installing a K-series engine into your EG Honda Civic or Del Sol. This kit is designed to work with a compressor from a K20A, A2, A3 or K20Z1 engine. It works with the K24 engine, but you must use one of the compressors listed above! 

The Hybrid Racing AC Kit is manufactured by a registered QS-9000/ISO 9002 company that has provided aluminum and steel tube assemblies to Japanese, American and European automakers since 1976. Each Kit is bent, crimped and brazed utilizing precise measurements and requirements provided by Hybrid Racing.

What does the kit come with?

The AC kit comes with 3 custom AC lines and all necessary wiring and O-rings. DOES NOT COME WITH MOUNTING BRACKETS

What parts will I need to install this kit?

You will need to keep 3 of your OEM lines as outlined in the install. We also recommend replacing the condenser and drier canister with new parts. 

What is involved in the wiring?

You will need to connect the AC Compressor to the stock engine bay wiring and install a relay (4 wires) to control the AC compressor clutch. This happens inside of the car.  

What condenser do I use?

You will use your stock Integra condenser.

What belt do I use with this setup?

If you do not plan on keeping power steering you will need to purchase a K20A3 02-05 Civic Si K20A3 pulley setup and belt. If you plan on running PS you can use a stock K20A/A2/Z1 belt.