AIM REARMASTER MIRROR / REVERSING CAMERA

RearMaster Mirror / Reversing Camera for Aim MX Displays and Data Loggers

Physical Connection

The Aim loggers built to manage rear cameras are provided with a female metallic 5 pins Binder connector, placed on the device bottom and labelled as ?VIDEO IN? (following image).

The Video In connector allows the connection of two different analog cameras, that may be activated as here down described.

• This camera offers a couple of interesting options:he possibility to reverse the image
• The possibility to enable or disable the parking overlay view

Please Note: some analog cameras require a 3.3V power. Please, verify before you connect yours to the +Vb output (12V), supplied by the pin3 of the Binder connector .

It has, as most of the analog cameras, a connection through standard RCA connectors (following right image), for which we have developed the patch cables:

Single RearMaster camera (cable length: 5m) ended with:

• Male metallic 5 pins Binder connector for connection to Aim loggers
• DC Power Connector (yellow) to be connected to the camera one;
• Video RCA Connector (red) to be connected to the camera one.

Double RearMaster camera (cable length: 6m) ended with

• Male metallic 5pins Binder connector for connection to AiM loggers
• X2 DC Power Connector (yellow)* to be connected to the camera one
• X2 Video RCA Connector (red)* to be connected to the camera one.

* The two DC Power and Video RCA cables couples are respectively 4m and 6m long, in order to allow both front camera and rear camera connection

Aim offers the same camera with a more reliable Binder connection (Part no. XB1ZCAMHD00; Binder conector pinouts are specified below):

The patch cables available are:

• Male metallic 5pins Binder connector for connection to AiM loggers
• Female metallic 5pins Binder connector for Mirror Camera connection.