TEGIWA 10MM 4-PIECE SPLIT REAR DRIVESHAFT SPACERS HONDA S2000

TEGIWA 2-Piece Driveshaft Spacers. Split design which saves time and labour when installing. These can be fitted with the driveshafts in situ. Anodised blue for a long lasting finish. When you lower an S2000 the driveshafts will be at a more severe angle and will stretch about 10mm or more per side. This will put a lot more pressure on the driveshafts and cv boots and will cause them to wear out quickly. These spacers are used to relieve the extra pressure on the driveshafts and will help restore the driveshaft angle to what it was before. The kit comes complete with new bolts and nuts.