SKUNK2 LOWER CONTROL ARM/REAR CAMBER ARMS KIT REPLACEMENT BUSHINGS

Skunk2's redesigned, low-deflection, polyurethane bushings are available separately and are compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits.

Important: Purchase includes two bushing halves. Each Rear Lower Control Arm and Rear Camber Kit mounting point requires two bushing halves.

Genuine Skunk2 polyurethane bushings act as bearings for quicker response and a more positive feel when compared to other manufacturers' bushings. Tearing and unseating problems normally associated with other fixed rubber bushings are eliminated by allowing the arm to rotate freely about the bushings. Fewer grooves within the inner diameter as well as special, radius-cut backsides help them last longer and avoid tearing and unseating. Thanks to the newdesign, bushing failures have been eliminated.

Note:
Compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits.
Purchase includes two bushing halves. Each Rear Lower Control Arm and Rear Camber Kit mounting point requires two bushing halves.
*Warning* When replacing worn bushings be sure to retain the metal sleeve that installs between the bushings, that is a re-usable piece that we do not currently offer a replacement for.